Tel. 1-877-52-FLOOR
Fax. 1-416-981-7799
|
 |
EasyMat
Heavenly Heat creates a perfect heating mat - EasyMat.
It is made from high quality heating cables, which
are woven in to flexible strips.
EasyMat is designed for heating bathrooms, sunrooms,
basement remodeling, or any other place where warming
the floor provides greater comfort. EasyMat may
be used as a surface warming system for specific
zoned floor.
Floor Structure
The below diagram illustrates the ways to apply EasyMat heating system in different floor structures.
EasyMat comes in three different heat requirement
strengths 12 / 15 or 20 Watt per square foot, depending
on the heat requirements of the room.
Use 12 Watt per square foot for secondary comfort
heating, while the use of 20 Watt per square foot
is recommended for primary room heating.
Flexible aluminum strips are used to arrange
the heating cables in an easy shaped mat.
High quality heating cables are woven into
16” wide mats which are between 10 and 90
feet long. The spacing of the wires is 3 inches
apart. The flexible strips have adhesive backing
in order to temporarily hold the product layout
to the surface during installation. The cold
leads are 12 feet long, for easy electrical
connection.
|
|
The cold leads are 14 AWG copper cable with a double
layer of PVC insulation. Rated at 105C.
Repair kits are offered for accidental damages to
the heating element cable during installation.
IMPORTANT
- DO NOT CUT HEATING ELEMENT CABLE. |
Features
EasyMat operates on ordinary current, already
in your home.
EasyMat underfloor heating systems are perfect
for either remodeling or new construction
applications.
The installation of EasyMat is easy, fast
and friendly. The heating cable comes in ready
made mats with glue strips attached.
EasyMat installation
does not require any material or special tools
for installation. |
 |
EasyMat radiates gentle warmth through a network
of low profile cables just below the floor.
EasyMat radiant heating element is 1/8” thick, so
it will not affect floor levels.
EasyMat flexible design makes it easier to work
around existing fixtures or cramped floor layouts.
EasyMat can be used as either Primary or Secondary
source of heating.
The floor temperature thermostats allow for independent
regulation of each heating zone.
EasyMat is delivered complete with installation
instructions designed for “Do It Yourself” in mind.
|
|
|
